Specifications:
Temperature range: -50'C-100'C
Control accuracy: 0.1'C
Input Power: DC 12V
High temperature alarm: 49-110'C
Applicable to Various spatial temperature control,Water temperature control, Incubators, etc.
13^6R
Temperature range: -50'C-100'C
Control accuracy: 0.1'C
Input Power: DC 12V
High temperature alarm: 49-110'C
Applicable to Various spatial temperature control,Water temperature control, Incubators, etc.
13^6R
اضافه به سبد خرید
XH-W1219 ماژول کنترل دما
XH-W1219 Digital Thermostat Module Temperature Controller Module Switch with Waterproof NTC Probe Dual LED Display Red+Green
Product Introduction:
1. Model: XH-W1219
2. Control Range: -50~110 celsius
3. Control Precision: 0.1 celsius
4. Measuring Input: NTC10K waterproof sensor L=0.5m
5. High Temperature Alarm: -49~110 celsius
6. Input Voltage: DC 12V
7. Output Type: relay output 10A (max)
8. Return Difference Setting: 0.1~30 celsius
9. Delay Starting: 0-10min
10. Temperature Calibration: -10~10 celsius
11. Size: 60*43*16mm
Function Introduction:
P0.Temperature Control Mode:when first use this product;if it is used to heating,please set H,if used to cooling,please set C
P1.Return Difference Setting:long press SET key entering into internal setting,choose P1 seting;then press SET key to achieve return difference value setting
P2:Temperature Calibration:this function is for temperature calibration.If detection temperature and actual temperature is different,then usrs can apply this function to calibrate
P3:Delay Start:this function is for compressor cooling
P4:Set High Temperature Alarm Value:when actual temperature is higher than this value,screen will flash and sound an alarm