ماژولهای کاربردی - مجتمع الکترونیک خوارزمی

Portable Ozone Generator 220V/110V
10g Double Ceramic Plate
W61-83R

ساخت یون منفی
AC220V Air Ionizer 10 Head Negative Ion Smoke Generator Air Purifier For Home Air Ioniser Remove Smoke Dust PM2.5

HV-1 High Voltage Igniter Kit Arc Ignition Parts Electric Arc Generator DIY Kits Module DC 3-5V 3A
P18W81

رله ماژول 4 کاناله
2.2D

ماژول رله تک کاناله
Maximum load: AC 250V/10A, DC 30V/10A
the module voltage 5V, 9,12V, 24V to choose
-0.83D

ماژول کنترل سریال با خروجی رله دو کاناله
DC 5V 12V 2-Channel RS232 Serial Control Relay Switch Board SCM PC SController

12V 16-Channel Relay interface board
each one needs 15-20mA Driver Current
Equiped with high-current relay, AC250V 10A ; DC30V 10A
-11D

برد رله 16 کاناله همراه با کنترل LAN و WIFI

ESP8266 ESP-01
2 Channel WiFi Relay Module
Description:
The 5V dual WiFi relay module uses ESP-01 as the WiFi module and is compatible with 8 bit MCU chip. Only a simple configuration process can realize the wireless control of the 2 way relay by using the mobile phone APP .
Function:
1.Onboard ESP-01 WiFi modules and high performance microprocessor STM8S103 .
2 The module has 2 operating modes of work:
Mode 1: mobile phone is directly mounted on WiFi module.
Mode 2: mobile phones and WiFi modules are equipped on routers simultaneously
Additional function: it can also be used as USB relay when ESP-01 is pulled out.
3.Transmission distance:
In an open environment, the maximum stable transmission distance is 100M when the mobile phone is mounted on the WiFi module.
4. When the WiFi module and mobile phone are carried on the router at the same time, the transmission distance depends on the signal strength of the router.
5. Onboard 5V, 10A//250V AC 10A//30V DC relay, which can be continuously pulled for 100 thousand times, has diode discharge protection, short response time.
6 .The use of Smartcongig technology in the mobile phone on the APP ESP-01 WiFi module to complete the account and password configuration, configured username and password memory function.
7.Board mode selection and real time working status indicator.
8. Reserved UART debug interface and STM8 SWIM program download interface.
9. Board size: 59*40mm.
W33P02-6.89D

Mode: G3MB-202P
Control Input: 5V (4V-6V) DC
Load : 75V ~ 264V AC 2A
P20

ESP8266-V1.0S MODULE
از وای فای ESP8266-V1.0S MODULE استفاده می شود
-8.35R

چاپگر حرارتی دستگاه POS با کیفیت بالا

پرینتر حرارتی

PORT : RS232 / TTL

المان سرد کننده
Model: TEC1-12706.
Size: 40mm x 40mm x 3.6mm.
Working current: 4.3-4.6 A (rated 12 v); Imax: 6A.
Rated voltage: DC12V (Vmax: 15 v starting current 5.8 A).
Operates Temperature: -30° to 70°.
Refrigeration power: Qcmax 50-60 w.
Y08P17-1.7D

crucible
57×87mm
-78R

Chip Model: TEC1-6306
Dimensions: 20 * 40 * 3.8mm Element number 63 on the
Rated voltage: DC6V (Vmax: 7.5V)
Working current: Imax = 5A (rated voltage startup)
Internal resistance: 1 - 1.2Ω (ambient temperature of 23 ± 1 °, 1kHZ Ac test)
Maximum temperature: Tmax (Qc = 0) above 65 °.
Refrigeration power: Qcmax 30W
Wire Size: Length 150 ± 5mm RV lead standard single head 5mm tinned wire
Mounting pressure: 85N / cm2
Working environment: temperature range -55 ° ~ 83 ° (high ambient temperatures drop directly affect the cooling efficiency)
Packaging technology : four weeks standard 704 silicone rubber seal
Packaging Standard: foam box packaging, storage conditions Ambient temperature -10 ° ~ 40 °
Storage conditions: -40 ~ 60 °
W-15R

Chip model: TES1-4902
Dimensions: 20*20*4.0mm, 49 pairs of components
Wire size: lead length 30±8mm RV standard wire
Maximum temperature difference: above 65 °C
Working current: Imax=2A
Rated voltage: maximum voltage: 6.0V
Assembly pressure: 85N/cm2
Working environment: temperature range -55 ° C ~ 83 ° C (excessive ambient temperature will directly affect cooling efficiency)
Packaging process: four weeks standard 704 silicone rubber seal
Packing standard: foam box packaging, storage conditions, ambient temperature -10 ° C ~ 40 ° C
Storage conditions: -40~60°C
Device characteristics: red line positive, black line negative (with literal surface for cooling surface, no literal surface for heat dissipation surface)
W-14R

همراه با بستهای لوله و بست نگه دارنده رادیاتور
Semiconductor refrigerating film exclusive water-cooled head, liquid cold water board, water-cooled exchanger, positive and negative are flat
Size: 40*40*12mm (2 sides can be attached to 1-2 cooling sheets)
Pagoda faucet: 9mm (inner diameter 7-8mm water pipe universal type)
Unique M-shaped runner supports full-scale placement
Both sides are flat and right angles and are completely matched with the cooling sheet. They are tailor-made for semiconductor refrigeration sheets, and can be used for heat dissipation, cold transfer, and cold water formation.
Disadvantages: easy to oxidize and black.
W-11R2R0.6R

کوره القایی
1000W
Induction Heating Machine-Zero voltage switching(zvs)
این دستگاه نیاز به موارد زیر دارد:
منبع تغذیه : 24ولت - 20 آمپر
لوله مسی قطر 6 میلیمتر که 7 دور به دور یک قطر 7 سانتیمتر پیچیده شده باشد.
پمپ آب
-259R

کوره القایی
ZVS high frequency induction heating
2500W high power high frequency
1. Size: 120*240*105 (unit: mm)
2. Working voltage: 12-48V
3. Maximum working voltage: 48V
4. Maximum working power: 2500W
5. Maximum working current: 50A
W-309R

-2^2R

-2^3R

The DS1990A-F5 chip is packaged in stainless steel and never rusts. The original wafer chip is used internally. Waterproof, anti-mite, anti-vibration, anti-corrosion, high temperature resistance, anti-aging! Factory direct sales, a large number of stock, welcome to buy!
TM card handle with DS1990A-F5 (fully compatible with TM1990A-F5, i1990A, and miscellaneous XX1990A)
It is applied to access control systems such as access control; biological tracking and identification system; warehouse logistics system; security patrol system; hotel, community card system; identification system; electronic wallet system; prepaid smart water meter and other industries.
W-1.92R

جوی استیک کیپد شیلد آردوینو
JOYSTICK KEYPAD SHIELD ARDUINO
P02-3.73R

9PIN
Long life, stable performance
Two analog outputs, all the way to the digital output
X, Y axis output of the two potentiometers can AD conversion readout twist angle
Press down on the joystick, can be dispatched all the way touch switch for digital
output has a pull-
Apply to the two-degree-of-freedom Servo PTZ control or other remote proportional control
Apply to the arduino platform compatible arduino sensor interface
-4.63R

Rotary Encoder Module Brick Sensor Development for arduino

PS2 wireless remote control arduino STM32
2.4G wireless remote control to send the receiver adapter board
distance up to 15 meters
anti-reverse protection
-40ق

Product parameters:
1 : Working voltage: 6--30V supports micro USB 5.0V power supply
2 : Trigger signal source: High-level trigger ( 3.0V - 24V ) The signal ground and the system ground do not jointly improve the anti-interference ability of the system (also can be short-circuited by itself)
3 : Output capacity: can control devices within 30v 5A or within 220v5A
4 : Quiescent current: 20mA operating current: 50mA
5 : Availability: more than 10 million times; Operating Temperature: -40 - 85 deg.] C; dimensions: 6.2 * 3.8 * 1.7cm
6 : With optocoupler isolation, enhance anti-interference ability, industrial grade circuit board, set parameters after power off forever memory.
-13R

dc 12v delay timer relay with delay adjustment potenti
-17R

CN101A timer small microcomputer
AC220V AC110V DC12V DC24V Spot

Working voltage: 220V/50-60Hz
Customized voltage: 12V, 24V, 36V, 48V, 110, 380V/50-60Hz DC
control output: 16A (direct), can also be used for expansion control.
Set number of times: 17 times switch (day) / Week)
Setting time: 1 minute to 168 hours Travel
time error: 1s/24h
Power failure memory: 180 days (built-in 1.2V rechargeable battery)
Dimensions: 60x60x32mm
Mounting method: Screw, connector connection (plus housing can be 72x72mm Panel mount)
Product application: Advertising light boxes, broadcasting equipment and other electrical appliances, etc.
W-25R