Working voltage: DC2.4~40V (with reverse connection protection function)
Detection voltage: DC2.4~30V
Working current: <30mA
Display mode: 0.28" LED, red blue Green Yellow (color optional)
Measurement rate: ≥200mS / Times
measurement accuracy: 3 ‰
limit working conditions:
low working voltage: +2.4V
maximum working voltage: +40V
working temperature: -10 ~ +65 °C
working humidity: 10 ~ 80% (no condensation)
working pressure: 80 ~ 106kPa
sunlight: no direct irradiation
-4^1R
Detection voltage: DC2.4~30V
Working current: <30mA
Display mode: 0.28" LED, red blue Green Yellow (color optional)
Measurement rate: ≥200mS / Times
measurement accuracy: 3 ‰
limit working conditions:
low working voltage: +2.4V
maximum working voltage: +40V
working temperature: -10 ~ +65 °C
working humidity: 10 ~ 80% (no condensation)
working pressure: 80 ~ 106kPa
sunlight: no direct irradiation
-4^1R
210000 ﷼
MICRO DIGITAL VOLTMETER DISPLAY 0.36"(MDVD036)
-Super high precision
-Ultra-low startup voltage, red minimum 4.8V, green minimum 2.7V, blue minimum 3.0V. When the power supply voltage is lower than 3.5V, only the brightness is lowered, but the measurement accuracy is not affected.
-With reverse connection protection, it will not burn.
Technical Parameters:
Measurement range Red DC4.80V-30.0V, green DC2.70-32.0V, blue DC3.00-30.0V
Power supply range No need to supply power separately, directly use the measured voltage as the power supply, the scope is the same as above
The highest input is DC32.0V.Note: The input voltage is higher than 32V and may be permanently damaged!
Allowable error 0.1%, when the decimal point is automatically shifted to measure voltage >= 10.0V, the measurement error is +/- 0.1V When measuring voltage <= 9.99V, the measurement error is +/- 0.02V
Input impedance > 100K ohms
Operating current red < 23mA, green < 18mA, blue < 13mA
Refresh rate is about 300mS
Display mode Three 0.36" LED digital tube
Display color red, blue, green
Optional lead length 15cm
Dimensions 23 x 15 x 10 mm, length X width X thickness (without mounting ears); with mounting ears length: 33mm
Mounting hole Pitch: 28mm,
Aperture: 2.8mm
net Weighs 4.7g
Gross weight 5.3g
Working temperature -10 ° C ~ 65 ° C
-3^63R
-Ultra-low startup voltage, red minimum 4.8V, green minimum 2.7V, blue minimum 3.0V. When the power supply voltage is lower than 3.5V, only the brightness is lowered, but the measurement accuracy is not affected.
-With reverse connection protection, it will not burn.
Technical Parameters:
Measurement range Red DC4.80V-30.0V, green DC2.70-32.0V, blue DC3.00-30.0V
Power supply range No need to supply power separately, directly use the measured voltage as the power supply, the scope is the same as above
The highest input is DC32.0V.Note: The input voltage is higher than 32V and may be permanently damaged!
Allowable error 0.1%, when the decimal point is automatically shifted to measure voltage >= 10.0V, the measurement error is +/- 0.1V When measuring voltage <= 9.99V, the measurement error is +/- 0.02V
Input impedance > 100K ohms
Operating current red < 23mA, green < 18mA, blue < 13mA
Refresh rate is about 300mS
Display mode Three 0.36" LED digital tube
Display color red, blue, green
Optional lead length 15cm
Dimensions 23 x 15 x 10 mm, length X width X thickness (without mounting ears); with mounting ears length: 33mm
Mounting hole Pitch: 28mm,
Aperture: 2.8mm
net Weighs 4.7g
Gross weight 5.3g
Working temperature -10 ° C ~ 65 ° C
-3^63R
190000 ﷼
P2EM-061-AC مانیتور جریان100 آمپر
Specification:
Apply to power grid voltage range: 110V-220V
Working voltage: 80 ~ 260VAC
Test voltage: 80 ~ 260VAC
Rated power: 100A / 22000W
Working Frequency: 45-65Hz
Measurement accuracy: 1.0
-115R
Apply to power grid voltage range: 110V-220V
Working voltage: 80 ~ 260VAC
Test voltage: 80 ~ 260VAC
Rated power: 100A / 22000W
Working Frequency: 45-65Hz
Measurement accuracy: 1.0
-115R
1900000 ﷼
4-20mA to 0-3.3V/5V/10V Current to Voltage Converter Signal Conversion Module I/V Transmitter
W29P11
W29P11
190000 ﷼
DC 100V 100A Voltmeter Ammeter With 100A Shunt 2 in1 DC Volt Amp Dual Display Panel Meter Red Blue Digital LED Display
Feature:
Operating voltage:DC 4.5 ~ 30V
Measure voltage: DC 0 ~ 100V
Minimum resolution(V): 0.1V
Measure current :100A (require external shunt)
Minimum resolution(A): 0.1A
Operating current: <20mA
Display: three 0.28" LED digital tube
Display color: Red and Blue (two-color display)
Dimensions: 48 x 29 x 21mm
Mounting cutout: 45.5 x 26.5mm
Refresh rate: about 500mS / times
Measure accuracy: 1% (± 1 digit)
Operating temperature: -10 to 65° c
Operating Humidity: 10 to 80% (non-condensing)
Working pressure: 80 to 106 kPa
Applications:Suitable for automotive/electric cars/motorcycles battery monitoring or other products voltage current measurement
Package Included:
1 X 100V voltmeter Ammeter
1X 100A/75mV shunt
p10-5.5d
Feature:
Operating voltage:DC 4.5 ~ 30V
Measure voltage: DC 0 ~ 100V
Minimum resolution(V): 0.1V
Measure current :100A (require external shunt)
Minimum resolution(A): 0.1A
Operating current: <20mA
Display: three 0.28" LED digital tube
Display color: Red and Blue (two-color display)
Dimensions: 48 x 29 x 21mm
Mounting cutout: 45.5 x 26.5mm
Refresh rate: about 500mS / times
Measure accuracy: 1% (± 1 digit)
Operating temperature: -10 to 65° c
Operating Humidity: 10 to 80% (non-condensing)
Working pressure: 80 to 106 kPa
Applications:Suitable for automotive/electric cars/motorcycles battery monitoring or other products voltage current measurement
Package Included:
1 X 100V voltmeter Ammeter
1X 100A/75mV shunt
p10-5.5d
900000 ﷼