ماژول درایور سنسور دما PT100
مشخصات فنی
This is a linear conversion module, the internal chip processing to convert the input heat resistance signal to temperature (voltage signal) output
Parameters
working voltage: 9V ~ 24V
input resistance: Pt100 thermal resistance
output voltage: 0.00V ~ 5.00V
temperature measurement range: -100 ~ +500 (degree)c
the output mode: on circuit board S2 pad: open circuit (output 0.00V ~ 5.00V); short answer (output 0.00V ~ 10.00V), the default is open circuit. S1 and J1 pads are not used
application range: remote data acquisition and control equipment
size: (long) 26mm * (wide) 23mm * (high) 10mm
12V: positive power supply interfaces (9V ~ 24V)
G: Power to the interface
IN: Thermal resistance cathode interface
G: Thermal resistance cathode interface
OUT: Signal output connector (0.00V ~ 5.00V/0.00V ~ 10.00V)
G: Power to the interface
Note: When the output 0.00V ~ 10.00V, power supply voltage to 15 volts
Output (0.00V ~ 5.00V) Resolution: 0.0083333 (V / ° C)
Output (0.00V ~ 10.00V) Resolution: 0.0166666 (V / ° C)
Note: when the output is 0.00V to 10.00V, the power supply voltage must be 15 volts
کلید واژه ها : PT100 DRIVER MODULE-خرید PT100 DRIVER MODULE-فروش PT100 DRIVER MODULE-راه اندازی PT100 DRIVER MODULE-فروشگاه PT100 DRIVER MODULE-قیمت PT100 DRIVER MODULE-دیتاشیت PT100 DRIVER MODULE
