LM35DZ Digital Temperature
Description:
Dimensions: 28.2mm (length) * 13.1mm (W) * 5.5mm (height)
Weight: 5g
Operation voltage: 4V-30V
Sensor Model: LM35DZ
Output Signal Type: Analog
Temperature measuring range: 0-100
Measurement accuracy: 0.5
linear scale factor: + 10 mV /
Low energy consumption, less than 60uA
low output impedance, 1mA current through only 0.1
with screw holes for easy and fixed installation. 2.6mm opening
second, the wiring instructions:
"+": Positive power
"-": negative
"out": pick AD converter analog module signal input terminal or directly connected to the multimeter to measure
P16W17-4.5R
Description:
Dimensions: 28.2mm (length) * 13.1mm (W) * 5.5mm (height)
Weight: 5g
Operation voltage: 4V-30V
Sensor Model: LM35DZ
Output Signal Type: Analog
Temperature measuring range: 0-100
Measurement accuracy: 0.5
linear scale factor: + 10 mV /
Low energy consumption, less than 60uA
low output impedance, 1mA current through only 0.1
with screw holes for easy and fixed installation. 2.6mm opening
second, the wiring instructions:
"+": Positive power
"-": negative
"out": pick AD converter analog module signal input terminal or directly connected to the multimeter to measure
P16W17-4.5R
اضافه به سبد خرید
ماژول سنسور دما LM35DZ
General Description
The LM35 series are precision integrated-circuit temperature sensors, whose output voltage is linearly proportional to the Celsius (Centigrade) temperature. The LM35 thus has an advantage over linear temperature sensors calibrated in
̊ Kelvin, as the user is not required to subtract a large constant voltage from its output to obtain convenient Centi- grade scaling. The LM35 does not require any external calibration or trimming to provide typical accuracies of ±1⁄4 ̊C at room temperature and ±3⁄4 ̊C over a full −55 to +150 ̊C temperature range. Low cost is assured by trimming and calibration at the wafer level. The LM35’s low output imped-ance, linear output, and precise inherent calibration make interfacing to readout or control circuitry especially easy. It can be used with single power supplies, or with plus and minus supplies. As it draws only 60 μA from its supply, it has very low self-heating, less than 0.1 ̊C in still air. The LM35 is rated to operate over a −55 ̊ to +150 ̊C temperature range, while the LM35C is rated for a −40 ̊ to +110 ̊C range (−10 ̊ with improved accuracy). The LM35 series is available pack-aged in hermetic TO-46 transistor packages, while the LM35C, LM35CA, and LM35D are also available in the plastic TO-92 transistor package. The LM35D is also avail-able in an 8-lead surface mount small outline package and a plastic TO-220 package.
Features
Calibrated directly in ̊ Celsius (Centigrade)
Linear + 10.0 mV/ ̊C scale factor
0.5 ̊C accuracy guaranteeable (at +25 ̊C)
Rated for full −55 ̊ to +150 ̊C range
Suitable for remote applications
Low cost due to wafer-level trimming
Operates from 4 to 30 volts
Less than 60 μA current drain
Low self-heating, 0.08 ̊C in still air
Nonlinearity only ±1⁄4 ̊C typical
Low impedance output, 0.1 Ω for 1 mA load