درایور موتور - مجتمع الکترونیک خوارزمی

درایور موتور dc
درایور ماسفت نبم پل جهت کنترل موتور دی سی ولتاژ بار 60 ولت
W77-1.6D

درایور استپر موتور
35 V and ±2.5 A
P10W77-1.1D

A4980K automotive programmable stepper drive / Flexible microstepping motor driver IC
درایور استپر موتور با حداکثر جریان 1.4 آمپر و ولتاژ 28 ولت
P10W77-4.2D

ماژول درایور استپر موتور با حداکثر جریان 2 آمپر و ولتاژ 35 ولت و محافظ جریان اضافی
P10W77-0.95D

درایور موتور دی سی
درایور موتور DC توان بالا ولتاژ 40V و حداکثر آمپر 42A
-3.0D

درایور موتور دی سی
درایور موتور DC توان بالا ولتاژ 40V و حداکثر آمپر 15A
P10-1.6D

درایور موتور دی سی
درایور موتور DC توان بالا ولتاژ 40V و حداکثر آمپر 42A
K09-2.0D

درایور موتور براشلس
سه درایور نیم پل در یک پک مناسب برای Brushless DC Motors
P10-1.2D

درایور استپر موتور
board for 3D Printer Stepstick Stepper Motor Driver Reprap 4 PCB Board
P11-1.2D

Technical parameters of 20A ESC:
Continuous current: 20A
Instantaneous current: 25A
Number of lithium battery sections: 2-3S
Programmable: yes
BEC type: linear ; 2A/5V
Weight ( with line ) : 28g
Size: 55 × 28 × 7mm
Plug: not included, need to purchase 3.5mm banana plug, T plug
-48R

Technical parameters of 30A ESC:
Continuous current: 30A
Instantaneous current: 40A
Number of lithium battery sections: 2-3S
Programmable: yes
BEC type: linear ; 2A/5V
Weight ( with line ) : 28g
Size: 55 × 28 × 7mm
Plug: not included, need to purchase 3.5mm banana plug, T plug
-49R

درایور موتور سه فاز با IGBT داخلی 600V 30A

ورژن چینی L9110S می باشد
ماژول درایور استپر موتور دی سی موتور
H-bridge Stepper Motor
Dual DC Motor Driver Controller Board For Arduino
P11W65-0.75D

درایور موتور دی سی با چهار خروجی و جریان هر کانال 1 آمپر و ولتاژ کارکرد 4.5V TO 36V بسیار مناسب برای پروژه های رباتیک
درایور موتور dc
P10W77-0.42D

درایور موتور دی سی
دو درایور پل کامل DC MOTOR جریان کلی 4 آمپر و حداکثر ولتاژ کارکرد 46 ولت
P11W69-1D

ماژول درایور استپر موتور و دی سی موتور
L298N Module Dual H Bridge Stepper Motor Driver Board Modules for Arduino Smart Car
-1.59D

Dual channel Motor Driver Shield
شیلد درایور دی سی موتور و استپر موتور دو کانال
P11W69-4D

L298P آی سی درایور موتور
-1.88D

درایور موتور DC تمام پل 48 ولت و حداکثر جریان 5 آمپر
P10-1D

درایور استپر موتور با دقت 1/128 و کنترلر SPI ولتاژ 8 الی 45 ولت -جریان 7 آمپر ماکزیمم
W77-5.63D

LV8729 driver module with 128 subdivisions is a good choice for Nema stepper motor whose current is less than 1.5A, which makes motor steady, quiet and precise.
Specifications:
Dimensions: 1.5mm * 2.0mm (Same with the A4988 and DRV8825)
Maximum drive current: 1.5A (Default 0.8A)
Operating voltage: 6V-36V, the proposed voltage is 12V
Support subdivisions: 1, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/128
Product Process: four layer PCB board
In the 64 subdivision or 128 subdivision to have a better ultra-quiet effect.
21R

5.0 A H-Bridge
Features
• 5.0 V to 36 V continuous operation with 24 V nominal operating voltage
(transient operation from 5.0 V to 40 V)
• 235 mΩ maximum RDS(on) at TJ = 150 °C (each H-Bridge MOSFET)
• 3.0 V and 5.0 V TTL/CMOS logic compatible inputs
• Overcurrent limiting (regulation) via internal constant-off-time PWM
• Output short-circuit protection (short to VPWR or GND)
• Temperature-dependant current-limit threshold reduction
• All inputs have an internal source/sink to define the default (floating input)
states
• Sleep mode with current draw < 20 µA
Applications
• DC motor control
• DC brushed and servo motor driver
• Copiers, printers
• Factory automation
• POS, ATM, vending kiosks
• Robotics
• Security camera control
• Ticketing, toll systems
-1.77D

کنترلر موتور سه فاز با قابلیت تغیر سرعت
P10K09W49

درایور موتور dc
درایور موتور دی سی با رابط سریال و عملکرد 2.75V TO 6.8V
DRV8830 DC MOTOR DRIVER
P11-3.3D

1.2 A 15 V H-Bridge motor driver IC
The 17510 is a monolithic H-Bridge designed to be used in portable electronic
applications such as digital and SLR cameras to control small DC motors.
The 17510 can operate efficiently with supply voltages as low as 2.0 V to as high
as 15 V. Its low RDS(on) H-Bridge output MOSFETs (0.45 Ω typical) can provide
continuous motor drive currents of 1.2 A and handle peak currents up to 3.8 A.
It is easily interfaced to low-cost MCUs via parallel 5.0 V compatible logic. The
device can be pulse width modulated (PWMed) at up to 200 kHz.
This device contains an integrated charge pump and level shifter (for gate drive
voltages), integrated shoot-through current protection (cross-conduction
suppression logic and timing), and undervoltage detection and shutdown
circuitry.
The 17510 has four operating modes: Forward, Reverse, Brake, and Tri-stated
(high-impedance). This device is powered by SMARTMOS technology.
Features
• 2.0 V to 15 V continuous operation
• Output current 1.2 A (DC), 3.8 A (peak)
• 450 mΩ RDS(on) H-Bridge MOSFETs
• 5.0 V TTL-/CMOS-compatible inputs
• PWM frequencies up to 200 kHz
• Undervoltage shutdown
• Cross-conduction suppression
-15R

1.0 A 6.8 V H-Bridge Motor Driver IC
The 17511 is a monolithic H-Bridge designed to be used in portable electronic applications to control small DC motors or bipolar step motors. End applications include head positioners (CDROM or disk drive), camera focus motors, and camera shutter solenoids. The 17511 can operate efficiently with supply voltages as low as 2.0 V to as high as 6.8 V. Its low RDS(ON) H-Bridge output MOSFETs (0.46 Ω typical) can provide continuos motor drive currents of 1.0 A
and handle peak currents up to 3.0 A. It is easily interfaced to low-cost MCUs via parallel 3.0 V or 5.0 V compatible logic. The device can be pulse width modulated (PWMed) at up to 200 kHz. This device contains an integrated charge pump and level shifter (for
gate drive voltages), integrated shoot-through current protection (cross-conduction suppression logic and timing), and undervoltage detection and shutdown circuitry.
The 17511 has four operating modes: Forward, Reverse, Brake, and Tri-state (high-impedance).
Features
• 2.0 to 6.8 V continuous operation
• Output current 1.0 A(DC), 3.0 A (peak)
• MOSFETs < 600 mΩ RDS(ON) @ 25 °C guaranteed
• 3.0 V/ 5.0 V TTL/ CMOS compatible logic inputs
• PWM frequencies up to 200 kHz
• Undervoltage shutdown
• Low power consumption
• Integrated charge pump
• Shoot-through current protection
• External MOSFET control circuit
-10R

PCA9685 16-Channel 12-Bit PWM Servo Driver
P11W33-1.8D

دو درایور تمام پل در یک پکیج ، جریان حداکثر 3.2 آمپر و جریان دائم 1.2 آمپر و ولتاژ VM=15V max, VCC=2.7-5.5V
P11W65-0.92D

درایور موتور دی سی نیم پل موتور DC با جریان دهی 5 آمپر و ولتاژ کارکرد حداکثر 40 ولت
P10-3.2D

IC PWR RELAY 7NPN 1:1 16DIP
P10W17-0.1D

IC PWR RELAY 7NPN 1:1
P10W17-0.1D

ماژول درایور استپر موتور
ماژول درایور موتور 30 آمپر VNH2SP30 full-bridge
Shield- stepper motor
W65-3D

L298P Motor shields Motor drive
logical part of the input voltageVD: 5 V
driven input part voltage VS: VIN input 6.5 ~ 12 V, PWRIN 4.8 ~ 35 V input
logic part of the current work Iss: <36mA
driven part of operating current Io: <2A
maximum power dissipation : 25 W (T = 75 Celsius )
control signal input level: high 2.3 V low -0.3 V
Pin occupation : D4 ~ D7 direct drive motor
W69-4.13D

تستر سروو موتور
Specifications:
Brand: HJ
Material: plastic
Color: blue + black
Input voltage: DC 5
~ 6V Width of the output signal: 800 ~ 2200us
Package size: 14 * 10 * 3cm / 5, 5 * 3.9 * 1.2in
Package weight: 39g / 1.4 oz
W-38R

TMC2130 instructions for use:
Features:
1 -Two-phase stepper motor single-phase current 2A (peak is 2.5A) motor operating current can be adjusted
2 -Supports two control modes: Step/DIR interface and SPI interface
3 -motor input voltage range: 4.75~46V
4 -logic interface input voltage: 3~5V
5 -subdivided into 256
6 -Noise-free operation combined with maximum efficiency and optimum motor torque
7 -High-precision sensorless motor load detection
8 -reduce energy consumption by 75%,
9 -high load drive is not lost
40R

2-channel PWM pulse frequency duty cycle adjustable module square wave rectangular wave signal generator stepper motor drive

1. Two independent PWM outputs, which can set the frequency and duty cycle respectively;
2. Wide frequency range and high precision;
3. Serial communication
Dimensions: 41*28mm Thickness: 1.6mm
11R

BTS7960B DC 43A Stepper Motor Driver Module
BTN7960B
Input voltage : 6V-27V
Maximum Current : 43A
Input level : 3.3V-5V
P11W17-36R

DMOS DUAL FULL BRIDGE DRIVER
OPERATING SUPPLY VOLTAGE FROM 8 TO 52V
5.6A OUTPUT PEAK CURRENT (2.8A DC)
RDS(ON) 0.3W TYP. VALUE @ Tj = 25 °C
OPERATING FREQUENCY UP TO 100KHz
NON DISSIPATIVE OVERCURRENT
PROTECTION
PARALLELED OPERATION
CROSS CONDUCTION PROTECTION
THERMAL SHUTDOWN
UNDER VOLTAGE LOCKOUT
INTEGRATED FAST FREE WHEELING DIODES
BIPOLAR STEPPER MOTOR
DUAL OR QUAD DC MOTOR
P10-3.2D

Motor / Motion / Ignition Controllers & Drivers H-Bridge, Low Voltage, DC Brushed Motor Driver, 2-15V, 3.8A, 200kHz, TSSOP20-EP

L298P Shield R3 DC Motor Driver
Operating voltage: 5V ~ 12V
Controller motor: L298P, DC motor units 2 or 1 step motor
Max current: 2A per channel or 4A max (with external power supply)
detection current: 1.65V / A
Free running stop and brake function
W69-5.16D

Applications
• DC motor control
• DC brushed and servo motor driver
• Copiers, printers
• Factory automation
• POS, ATM, vending kiosks
• Robotics
• Security camera control
• Ticketing, toll systems
K09-3.91D

P24W17-0.39D

ماژول درایور استپر موتور
با حداکثر جریان 0.7 آمپر و ولتاژ بار 30 ولت و ولتاژ کار 5.5-3 ولت
P10W77-2.2D

ماژول تستر سروو موتور
CCPM Servo Consistency Master / Servo tester

کنترل دو موتور همزمان
P11W65-0.7D

L298N Dual Bridge DC Stepper Motor Driver Shield Expansion Controller Board
P11W69-2.27D

ماژول درایور موتور TB6612FNG
P11W65-1.1D

ماژول درایور موتور VNH2SP30 DUAL
P11W65-5.85D