AVR328P + MPU6050 flight control module with charging function
Provide suitable to the four axis are modified MWC source code.
MWC CJMCU - the phantom micro four axis flight control mini flight control 6 axis module
Debugging needs certain foundation.
Need to configure the motor, remote control, receiver, battery. You can fly.
Note: a very flexible. Need to flight.
PCB size: 76 mm x 76 mm heavy gold craft,Four hollow cup motor pitch: 61 mm x 61 mm
The micro four axis by FTDI mouth GND and 5 v foreign 1 s lithium battery recharged. Interface as shown in the figure below:
Shut OFF the power switch, the four axis behind the switch to OFF.
Open the charging switch, namely four shaft switch to Char ON the right.
Connect a serial port downloader GND to mini MWC GND, 5 v to 5 v mini MWC, charging indicator Char on, the battery to charge.
Wait for Char leds put out, the Sta in LED lighting, charging is complete
Tank chassis DIY custom chassis
Motor working voltage: 9 to 12 v (9 v when the turn speed of more than 110 per minute)
Product description: the tank chassis appearance delicate and beautiful, chassis and gear train are all metal stent, strong stability, double motor traction, strong, fast smooth, high stability, can be forward backward, turn left, turn right, turn circles, flexible characteristics of the fuselage intermediate obligate a steering gear installation, install the steering gear to provide convenient, at the same time, the large chassis platform, installation of control circuit for the customer to provide enough space, and the chassis is equipped with a bracket under the front platform, customers can be used to install the battery.
Product size: about 174 * 212 * 87 mm (length * width * height) batch is different, sometimes the size will be small change
robot obstacle-navigation custom car chassis
Working voltage: 9 to 12 v (9 v when the turn speed of more than 110 per minute)
Products: enhanced the obstacle-surmounting tank chassis, the chassis and the structure of the gear train fuselage use full metal production, delicate and beautiful, strong stability, four strong motor traction, powerful, can into can back, can turn left turn right, etc., and smooth operation, running smoothly; Moreover is chassis parts before and after stent free activity, according to the car climbs to adjust the overall balance of the chassis, flexible operation, among the fuselage also reserved a steering gear mouth install steering gear provides convenient installation, the entire chassis platform is wide, installation of control circuit to provide enough space for the customer.
Size: 383 mm * 204 mm * 84 mm (length * width * height) batch is different, sometimes the size will be small change
caterpillar Smart Intelligent
Weight only 166g
Shock absorption effect is good, you can press 0.7cm
Small size 9.7*18*4.5cm
Motor for General Motors 130, supports 3-8v voltage (can be replaced by other same type of high quality motor)
2WD Car Kit for Arduino Robot Bluetooth Controlled
The Kit is for making a 2WD smart car. It has everything needed to make a simple smart toy car except the 18650 battery (As battery is prohibitted to be transported, you need to buy a couple of 18650 batteries locally, or make your own power supply system (7~12V)).
200rpm 12v With hall senor
Product name: TB400
car board material: steel
product color: black
track material: plastic
track width: 40mm
product weight: 1.1KG
design load: 4KG (depending on motor torque)
Product size: 240*250*50mm
200rpm 12v With hall senor
[rated voltage] DC12V
[No-load current] 100mA
[suitable voltage] 6-12V
[No-load speed] 170-350 rev / min
[weight] 100 grams
Weight: 7 grams
Mounting hole distance: compatible with MK KK flight control mounting hole distance
Applicable control system: fully compatible with MK KK flight control
Connected tones: 1-8 (more than 8 may damage the connection board due to excessive current)
The whole set of 6 yuan package contains:
1. ESC wiring board × 1;
2.14AWG silica gel line - length 10cm × 2 (one red and black);
3. T plug male × 1;
4. Heat shrinkable tube.
2oz copper foil to ensure high current through;
4-layer PCB, power high current and BEC layering, to avoid interference of BEC ground wire by power current;
6 pairs of ESC power pad, suitable for X-shaped or H-shaped rack transfer arrangement;
Dual BEC: 5V / 2A synchronous rectification switching BEC, 12V / 0.5A linear BEC;
compatible sheet width smaller than 48mm frame
division resistance current collector plate 4 * 25A, short *. 30A. 4 (10s)
BEC 5V Ripple: 40mV (Vin=16V, Vout=5V@2A load)
BEC 12V linear regulator, very low ripple, will not interfere with image signal;
52*36*3mm, including XT60 total weight 11g
installation hole distance 30.5 Mm, aperture 3mm
Instructions for use:
Thepackage contains a genuine Amass XT60 plug, you need to weld the distribution board yourself;
pay attention to the input polarity, do not input reverse connection, short circuit !
Do not touch the carbon fiber board behind the distribution board, which may cause a short circuit.
With 4S, 12V regulated output can last 500mA; voltage regulation accuracy is 2.5%;
12V regulator chip also supports 3S battery input, but output voltage = 3S real-time voltage -1V;
BEC 12V can be used for a 12V camera and a 600mW picture pass.
Body material:Aluminum alloy + rubber
Roller material:Aluminum alloy
Body material:ABS+ rubber
[Aperture]: Approx. 1.95mm (suitable for 2mm motor shaft or axle)
Name:4DOF Robot Arm
Weight: About 280
Servo: 4 x MG90(Metal Gear)
2.4G wireless remote control to send the receiver adapter board
distance up to 15 meters