آردوینو - مجتمع الکترونیک خوارزمی

Eeprom:512 KB
Input Voltage Limit:3.3V
Microcontroller:AT91SAM3X8E
Weight:36 g
Color:BLUE AND GRAY
Output Current:6-16V
Voltage:7-12V
W69P07-74R

برد آردوینو لی لی پد 328
LILYPAD ARDUINO 328 MAIN BOARD
P08W65-1.97D

لی لی پد آردوینو ATTINY85
P08-1.58D

برد آموزشی آردوینو لئوناردو
ATMEGA32U4
P08W09-4.58D

برد آموزشی آردوینو یونو آر3 ATMEGA328 مدل UNO R3
P08W13

Microcontroller:ATmega328P
Operating Voltage:5V
Input Voltage (recommended) 7-12V
Input Voltage (limit) 6-20V
Digital I/O Pins:14 (of which 6 provide PWM output)
PWM Digital I/O Pins:6
Analog Input Pins:6
DC Current per I/O Pin:20 mA
DC Current for 3.3V Pin:50 mA
Flash Memory:32 KB (ATmega328P) of which 0.5 KB used by bootloader
SRAM:2 KB (ATmega328P)
EEPROM:1 KB (ATmega328P)
Clock Speed:16 MHz
LED_BUILTIN:13
W13P08-26.72R

P08W69-8.28D

ماژول LILYPAD ATMEGA32U4
P08W65-4.89

CH340
board based on the ATmega328 (Arduino Nano 3.x)
P08W57-26R

FT232RL
board based on the ATmega328 (Arduino Nano 3.x)
P08W57-24R

ARDUINO MEGA 2560 REV3
With 54 digital I/O pins, 16 analog inputs
P08W69-7.8D

پرومیکرو آردوینو
PRO MICRO ARDUINO
P08W01-3.5D

برد پرو مینی آردوینو
5V
PRO MINI ATMEGA328P BOARD
P08W29-9^5R

-1.93d

NANO PROTOTYPE SHIELD V3.0
برد توسعه آردوینو نانو
-1D

Perfect for engravers, laser cutters, CNC machines and 3D printers. This shield simply sticks on top of your Arduino board and can control up to 4 stepper motors
W09P07-6R

1. This expansion board as a driver expansion board can be used for engraving machines, 3D printers.
2. Compatible with micro-drive laser engraving machine, three-axis CNC engraving machine, and worked with Arduino nano.
3. It is a total of four slots, can drive four A4988 stepper motor. Each road stepper motors only need two IO ports. In other words, six IO ports can be well managed three stepper motors.
4. Released the digital IO interface, easy to connect to other modules, such as ENDSTOP.
5. 2A can be controlled within the two-phase four-wire stepper motor.
6. Released the I2C interface, you can connect to the LCD I2C or another I2C module.
Note:Do not reverse the direction, because it will damage your hardware
W09P07-12R

شیلد LCD کاراکتری 1602 آردوینو
LCD KEYPAD SHIELD V1.0 MODULE 1602
P03W17-2.53D

Xbee Expansion Board V03 Compatible with Bluetooh
Description:
- Bee Adapter is a compact USB to serial adapter equipped with BEE (20pin 2.0mm) sockets.
- With integrated FT232RL IC, It can be used for programming or communicating with board which basic Arduino but without USB interface, like Sniffer Nano.
- On the other hand, you may connect your PC to various wireless applications via the BEE compatible modules.
- The Adapter also could support XBee interface.
Specification:
- Color: Deep Blue
- Size: Approx. 60x60x25mm / 2.36x2.36x0.98inch
- 3.3V and 5V dual power output
- 3.3V and 5V IO compatible
- USB 2.0 protocol
- BitBang mode ready
- Easily connected to a PC via mini USB cable
- XBee-setting support software X-CTU
- Usage 1: PC via a USB cable directly connected with XBee adapters
- Usage 2: Bluetooth Bee configure or use as a data-transmission
- Uses 3: ARDUINO BOARD PRO MINI Downloader
-15R

شیلد پروتوتایپ آردوینو-همرا با برد بورد
PROTOTYPE SHIELD V.5
P08W45-0.96D

ARDUINO MEGA PROTOTYPE SHIELD V3.0
P08-1.99D

شیلد دیتا لاگر آردوینو
( Arduino Data Logging Shield )
DATA LOGGING SHIELD V1.0
P06W29-1.58D

ARDUINO MEGA SENSOR SHIELD V2.0
P08-2.2D

شیلد شبکه آردوینو
W5100 ETHERNET SHIELD ARDUINO
P07W41-4.89D

motor shield arduino
servo :2
stepper : 2
dc : 4
-2D

4 digit 7-segment LED display module driven by two serial 74HC595’s
4 LED’s
10K potentiometer
3 x push buttons
Piezo buzzer
DS18B20 temperature sensor interface (not included)
Infrared receiver interface
Serial interface header for connection to serial modules
P07W69-2.62D

Serial Board Module Port IIC/I2C/TWI/SPI
Interface Module for Arduino 1602 LCD
-0.72D

جوی استیک
5PIN
-0.6D

PUSH BUTTON MODULE
5 V
4 BUTTON
3 BUTTON
37 X 21 X 1.6 MM
-13R

ماژول نگهدارنده زمان در میکروکنترلر
DS1307N
-4.5R

ماژول خازنی لمسی 4 کانال
W73-2.77R

ماژول خازنی لمسی 8 کانال
W73-4.7R

ماژول خازنی لمسی 16 کانال
TTP229 Capacitive Touch Sensor Module (16 channels)
P02W33W73-5R

Micro SD card module mini TF card reading and writing SPI interface
W09P07-1.79R

ماژول تغذیه برد بورد و بردهای آردوینو
-1D

5ولت-2 آمپر
K04-1.3D

4 key Analog Buttons
-0.9D

RGB Full color LED SMD Module
-0.2D

Straight Slide Potentiometer Module
-2D

Active Alarm Buzzer Driver Module
W17P20-0^55D

voice recognition module v3
RED0515-P22W25-19D

ماژول میکروفن آردوینو
RED0442-P22W29-0^5D