ماژول تغذیه افزاینده و مبدل DC to DC QSKJ
این یک مبدل DC به DC با عملکرد بالا (Auto Boost / Buck) و با طیف گسترده ورودی 10-32 ولت و خروجی متغیر 12-35 ولت می باشد. خروجی قدرتمند تا 150 وات و حداکثر 10آمپر که می تواند بدون توجه به ولتاژ ورودی ناپایدار خروجی به طور منظم ثابت بماند.
مشخصات فنی
کد فنی : QSKJ
ولتاژ ورودی : 10-32 V
ولتاژ خروجی : 12-35 V
دقت خروجی : 1.5%
جریان ورودی : 16A (MAX)
سرعت پاسخ : 200u
محدوده دما : -45°+85°
ابعاد : 65 * 56.5 * 23mm
کاربردها : توان اولیه برای سیستم, منبع تغذیه در خودروها (سیستم صوتی، فن های برقی) ، مبدل باتری DC
Input and Output Voltage Considerations
This particular model expects to see an input between 10 to 32 volts and will convert it to 12 to 35 Volts.
The rule of thumb here is that your input voltage must be lower than your output voltage. For example, if you want a 24 volt output, you will want less than 24 volt input.
Current Considerations (Efficiency)
Consideration should also be given to the power capacity of your input power source. If you’re using a 12 volt source to create 24 volts at 2 amps, you will be consuming about 50 Watts ( Power in Watts = Voltage x Current in Amps)
The temptation may be to believe that all you need to do is provide about 4 amps of current at 12 Volts. That’s not true.
Power conversion involves losses or efficiency. The higher the loss, the lower efficiency. The lower the loss, the higher the efficiency.
For example, if I lost 10 percent of the power in conversion, the device would be considered 90 percent efficient.
Because the efficiency specifications on this device are not documented, I choose to be conservative in my estimation of it’s efficiency and thus consider it to be an 80 percent efficient circuit.
It makes things safer and a heck of a lot more fun when you’re not burning down the house.
Now, what all this means is that if I want 50 watt as an output, I will ensure that my input source is capable of providing at least 62.5 Watts. ( 50/62.5 = 0.8 ).
Current Output Limitations
Remember this a 150W watt supply, thus your output current limitations will be directly tied to the voltage you select as an output.
For example, if you choose 35 Volts as an output, you are limited to about 4.2 amps.
On the other hand, if 18 volts is where you need to be, you’ve got about 8.3 amps.
My conservative nature again… In my designs, I will treat this as 120W boost converter. Even though this is advertized as a 150 Watt supply, I derate it.
This may in fact be a 150W supply, but that’s under a certain set of conditions. Absent a specification sheet of some sort, I have no idea what these conditions are.
Though it really doesn’t come with instructions, it is pretty easy to use. The illustration below says it all.
کلید واژه ها : ماژول تغذیه , فروش قطعات الکترونیک , ماژول تغذیه QSKJ،مبدل DC to DC،فروش QSKJ
بدون نظر